Technical Data
Package : 280 ml cartridge, 12 pcs in a box. 600 ml foil package, 20 pcs in a box.
General Purpose Sealants
Acid-curing all-purpose Silicone sealant. Adheres well to aluminium, glass, glazed surfaces, ceramic tiles; treated, varnished or painted wood, painted surfaces; many plastics such as PVC, epoxide, polyesters and laminate. Touch-dries quickly. Non-sagging, does not spread in the joint. Cured sealant is UV proof.
Field of application
General construction, sealing and repair works. Product has been tested and is classified accordingly: Sealant used for sanitary applications.
EN 15651-3:2012: Type S: CLASS S1 (transparent)
EN 15651-3:2012: Type S: CLASS S2 (colours)
Application Conditions
Application temperature between +5 °C and +40 °C. The application temperature of the sealant must be +20 °C - +25 °C. The application at temperatures lower than +5 °C, can only be carried out when connected surfaces are free of condensation, snow and ice. Do not use in contact with natural stones such as marble, granite, fibre, cement and mortar. Do not use in contact with metals such as lead, copper, brass and zinc due to corrosion. Silicone may discolour in contact with some organic elastomers, e.g. EPDM and neoprene. Not suitable for sealing aquariums and for under-water applications.
Safety Regulations
Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health. Detailed safety information is available on safety data sheet (SDS).
Storage Conditions
Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C.
Cleaning
Uncured foam can be removed with acetone, cured foam only mechanically.
ApplicationInstruction
The surfaces must be clean from dust, loose particles and oil. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with the clean cloth.
280 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing sealant. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant, by repeatedly pressing the gun trigger.
600 ml foil package: Open the application nozzle of the gun, insert the package in the gun and open the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap.
Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. After application, smooth the surface with a rubber silicone scraper and remove excess material.
| Properties | Unit | Value |
|---|---|---|
| Tack free time | minutes | 8-10 |
| Cure time | mm/24 h | 2,5-3 – transparent 3,5-4 – coloured |
| Density | g/cm3 | 0,95 – transparent 1,01 – coloured |
| Properties of cured sealant | Unit | Value |
|---|---|---|
| Intensity of microbiological grows,ISO846 | transparent – coloured | |
| Resistance to flow,ISO7390 | mm | 0 |
| Change in volume,ISO10563 | % | 50 ± 1 |
| Elongation at break,ISO37 | % |
840 ± 25 – transparent 700 ± 25 – coloured |
| Tensile strength,ISO37 | N/mm2 | 2,4 ± 0,2 – transparent 2,2 ± 0,2 – coloured |
| Modulus at 100% elongation, ISO37 | N/mm2 | 0,4 ± 0,1 – transparent 0,5 ± 0,1– coloured |
| Indentation hardness A scale (Shore A) | 25 ± 2 – transparent 30 ± 2 – coloured |
|
| Temperature resistance | ˚C | -40 to +100 |
The parameters indicated have been measured at +23 °C and 50% relative air humidity.
